PET

Discussions about the Version 4 concerning the core model simulations
ella ma
Posts: 40
Joined: Wed Aug 14, 2019 12:10 pm

PET

Postby ella ma » Wed Mar 25, 2020 10:01 am

Hi, Tim.

I have use Biomet to calculate PET.
But i found a lot of -999.
i can not get the reason.
The position of -999 in Picture 2 is the Picture 1.

Thanks.

Best
Ella
Attachments
1.jpg
1.jpg (9.28 KiB) Viewed 30 times
2.jpg

Tim
Posts: 1219
Joined: Mon May 15, 2017 3:46 pm

Re: PET

Postby Tim » Wed Mar 25, 2020 10:10 am

Hi Ella,

It is -999 inside of buildings.
Keep in mind that Spaces starts counting of grid cells with 1,1 in lower left and Leonardo with 0,0.

Best regards,
Tim

ella ma
Posts: 40
Joined: Wed Aug 14, 2019 12:10 pm

Re: PET

Postby ella ma » Wed Mar 25, 2020 12:47 pm

Thank you very much!

Ella

Tim wrote:Hi Ella,

It is -999 inside of buildings.
Keep in mind that Spaces starts counting of grid cells with 1,1 in lower left and Leonardo with 0,0.

Best regards,
Tim

ella ma
Posts: 40
Joined: Wed Aug 14, 2019 12:10 pm

Re: PET

Postby ella ma » Thu Mar 26, 2020 9:03 am

Hi Tim,

Another question, do you have any ways to open the PET files of different periods quickly and select the specific points.

Thanks

Ella
Tim wrote:Hi Ella,

It is -999 inside of buildings.
Keep in mind that Spaces starts counting of grid cells with 1,1 in lower left and Leonardo with 0,0.

Best regards,
Tim

Tim
Posts: 1219
Joined: Mon May 15, 2017 3:46 pm

Re: PET

Postby Tim » Thu Mar 26, 2020 9:21 am

Hi Ella,

I think you mean Extract Data from Map for several timesteps at a specific point. Check this video: https://www.youtube.com/watch?v=ArjEKtex9Mc&t=650s. It is shown for building outputs but works the same for 2D data as PET.

Best regards,
Tim


Return to “ENVI-met 4 (Main Simulation Model)”

Who is online

Users browsing this forum: No registered users and 0 guests